The Telraam S2 Outdoor device is designed to be mounted easily onto a pole or similar vertical structure. On the back of the unit, you’ll find one or two mounting anchors (depending on the version of your unit). These are used to attach the device securely with cable ties—either metal ones for a long-term installation or plastic ones for short-term use (examples). Plastic cable ties are included with your delivery.
Cable ties guided through the mounting anchors and around a pole, ready to be tightened
⚠️ Important: Before (or during) the physical installation, make sure your Telraam S2 Outdoor is also registered online. This can be done by the network admin of your Telraam network. Check out our registration guide for step-by-step instructions.
💡If you're powering your Telraam with the solar battery kit, we recommend installing the solar panel first. Why? Because it needs to be mounted higher up the pole than the Telraam sensor to avoid any shading and to maximise sun exposure. |
Summary |
✅ Use cable ties through the mounting anchors to attach the device to a pole 📦 Plastic ties are included in the box 🌞 If using solar: install the solar-battery kit first, then the Telraam device 🔗 Don’t forget to register your device before or during the installation |
