All Categories Telraam S2 How to remove the bracket from the window

How to remove the bracket from the window

Simple, use nailpolishremover!

We tested several methods, and nail polish remover turned out to be the most effective solution for completely removing tape residue from the window.

What you need:

  • Nail polish remover (preferably with acetone)

  • Cotton pads and/or cotton swabs

  • A plastic spatula or bank card

  • Optional: glass cleaner for a polished finish

Step-by-step:

  1. Carefully remove the bracket from the window.
    If it's difficult, use a plastic card to gently slide under the adhesive strip.

    💡 Tip: If the bracket won’t come off easily, apply some nail polish remover to a cotton swab and press it against the edges of the adhesive. This will help loosen it gradually.

  2. Apply nail polish remover to a cotton pad and dab it onto the glue residue. Let it soak in for a few seconds.

  3. Gently rub with the cotton pad until the adhesive loosens.

  4. Repeat if needed until all residue is removed.

  5. Clean the window with water and a mild detergent or glass cleaner.

Reusing the bracket

If you want to reuse the Telraam bracket (for example, on another window or in a new location), that’s perfectly fine. Just make sure not to reuse the original tape. Once removed, it no longer provides a reliable hold, which can affect both the installation stability and data quality.

We recommend using new double-sided tape, preferably 3M VHB (Very High Bond) tape, for a strong and durable setup.

Order new tape here:

Note: A width of around 12 mm is closest to the original tape.


Still have questions or need assistance? Don’t hesitate to contact us at support@telraam.net. We're happy to help.

Was this article helpful?

Thanks for your feedback!